Store and transport 3 diving tanks on most vertical surfaces on your boat. 3 quick-release brackets adjust along a 32" aluminum track to fit most tank sizes and fold up or down when not in use. Vacuum cups attach and remove in seconds.
Features:
Specs:
This vacuum cup-mounted rack lets you store 3 dive tanks on your boat. It has 3 clamps that adjust along the 32" aluminum track so they will hold most tank sizes. It mounts with 3 vacuum cups that have a total pull rating of 630 lbs so it will easily hold 3 tanks, no matter how full they are. Each bracket has a hole in the tip so you can run a tie-down string through for extra tank security.
When not in use the brackets fold up or down so they won't take up valuable space on your boat.
This tank rack is quick and easy to mount. To install the rack make sure the mounting surface is clean and place the vacuum cups on any non-porous surface on your boat then press the pump several times until the orange band disappears. To break the seal and remove the holder from your boat simply pull the T-shaped tab up and towards the center of the cup. As suction decreases over time the plunger will extend from the cup. When the orange indicator band shows simply re-pump the plunger.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna be taking a look at The SeaSucker Tank Storage Rack. This three tank storage rack makes storing your oxygen tanks quick and easy. This would be ideal for your boat, or you can take it with you when you're diving with friends. It's gonna feature three 6" vacuum mounts, that are mounted onto a 32" aluminum track. Aluminum is strong and durable. You don't have to worry about any rust or corrosion. It's also gonna come with three tank holders, that can be folded down, or they can be folded up when they're not being used.
These are very strong and durable. They're made from a durable plastic construction. They also have holes in the end of them so if you want to, you can string something across there for added security. One of the neat things I like about these holders, is that it's a two piece design. It's basically two halves, make up one unit. So, right here in the middle, they can split, and there's multiple teeth on the inside of here.
That way, each holder can be adjusted in width to fit almost any tank size out there. The product's fully made in the USA. It's gonna come with waterproof lubricant, to keep the SeaSucker components working as they should. When you're ready to install it, you want to make sure that the mounting surface and the vacuum seals are clean. Place this onto the mounting surface, and then you're gonna use this plunger right here, you're gonna pump it, until the orange portion is hidden inside the housing. That lets you know that, that seal is fully installed, and it's fully seated, and that the storage rack is ready to be used.
You want to do that for each one. When you're ready to remove it or uninstall it, it's got these grips right here. One located on each side. Push in, that's gonna break the vacuum seal, that way you can easily remove this from the installation area. That's gonna do it for today's look at The SeaSucker Tank Storage Rack.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.